Emitters

DRIPPERS
Pressure Compensating
Self-flushing, these emitters deliver precise amounts of water regardless of changes in terrain or length of row.
VIBRA-CLEAN Emitters
Low profile vibra-clean emitters have a wider operating range (5-60 psi) than most other pressure compensating emitters. Use the large hole punch for inserting into 1/2" or larger tubing.
WOODPECKER Emitters

 

Heavy duty. Used in vineyards. 1/4" inlet and outlet (inlet barb plugs into mainline tubing). Pressure range from 15-70 psi.
PINCH DRIP Emitters
Lies almost flat on mainline tubing. Easy finger/thumb installation. 1/4" barbed inlet, 1/4" nipple outlet. Pressure range 15-45 psi.
Non Pressure Compensating DRIPPERS
Work great at low pressure. If using a pressure regulator, these work best at 20 psi or lower (10 or 12 psi)
POT DRIPPERS
The 2" stake on this pot dripper and threaded inlet allow 1/4" micro-tubing to connect to reach containers from the mainline.
TAKE-APART EMITTERS
Work very well with low pressure gravity systems and pull apart for easy cleaning. The 1/4" barbed inlet can be plugged directly into a mainline or attached to the end of 1/4" tubing.
These work down to 4 psi.

IN-LINE TAKE-APART EMITTERS
If more than one emitter is desired for a container, these in-line take-apart emitters can be installed on 1/4" tubing in a series, before the end take-apart.

SPRINKLERS & SPRAYERS

EIN DOR Mini-Sprinklers

360 degree spray pattern, fixed radius
Must be used with Press Fit Barb to allow connection to 1/4" tubing or rigid riser.
Ein Dor Mini-Sprinklers
PRESS FIT BARBS
are used with Ein Dor mini-sprinklers and Wing Sprinklers to connect to 1/4" tubing.
Use with Mini-sprinklers & Wing sprinklers. Barbed end fits into 1/4" micro tubing

WING SPRINKLERS
Full circle sprayers.
Best at low pressures (15-30 psi).
Even distribution of droplets.
Use press fit barbs to connect to 1/4" tubing or rigid risers.
Wing Sprinklers

MINI JETS

for quarter, half, full & strip patterns.
Work at pressures as low as 5 psi. At pressures above 30 psi flat spray turns into more of a mist.
10-32 threaded base (inlet) fits into end of 1/4" tubing and rigid risers. (Easily installed using the hex end of the yellow handle punch tool.)
Mini-Jet Sprayers

MICRO JETS

Quarter, half & full circle patterns
with adjustable flow rate. Maximum flow of 22 gph at 30 psi, radius of 7-8'
Jets can be shut off individually
10-32 threaded base (inlet).
Pressure range 15-45 psi
Qtr. & half circle patterns give a fan spray, full circle gives fingers of water.
Micro-Jet sprinklers
MISTERS & SPRAY STAKES

Tornado
Mister

High flow for moisture loving plants and propagation. Insert threaded inlet into end of 1/4" mini-tubing, mainline or PVC.
BLACK Tornado Mister 4' dia. spray
RED Tornado Mister 6' dia. spray
Tornado misters

Mini-Mister
A low flow directional sprayer for misting individual plants (fuchsias, azaleas, bonsai, ferns, etc). The 1/4" barb attaches to mainline tubing or at end of 1/4" tubing.
Pressure range: 10-35 psi
Can be taken apart for cleaning.
Mini-misters
VARI MISTERS
With built-in valve to control flow and pattern size of the spray, Vari Misters, have  a 10-32 threaded base to work with 1/4" tubing or rigid riser. Maximum flow ranges from 4 GPH @ 10 PSI to 7.5 GPH @ 30 PSI

SPRAY STAKES
Great for large potted plants in residential gardens, designed for commercial container growing, these stakes give a downward 160 deg. cone shaped spray. Use with 1/8" micro-tubing. Shutoff plug on bottom of stake. Length 4 3/4". Pressure range 15-25 psi.
Spray Stakes sprayers
flow rate@20psi      container size
     orange   4.2 gph      3-5 gal
   green  11.4 gph   5-10 gal
  black   15 gph   10-30 gal
(5) orange
   SKU 366    $1.25

(5) green
   SKU 368   $1.25

(5) black
   SKU 370   $1.25